Plug-in entry/exit card on the back of the Pixsys HMI
Analog and digital I/O via RS485 Modbus or CANopen
The ETD1644 from Pixsys is an input/output card that connects to the rear of the brand’s Soft PLC HMI. It allows for the acquisition and control of analog and digital signals directly at the panel level, without a dedicated module.
The card is connected directly to the back of the panel. Up to two ETD1644 can be installed on a single terminal, for a compact machine that is fully managed by the HMI.
Communication with the Soft PLC is done via the RS485 serial connection in Modbus RTU or via the CANopen bus.
Chrome-plated steel casing RAL 7016, 87 x 93 x 35 mm, approximately 200 g, CE and UL certifications.
DYNATIME SA distributes the Pixsys products in Switzerland and advises you on the configuration of the I/O of your terminal. See also the Pixsys TD series HMI and our range of products automation.
| Function | Analog and digital I/O card for HMI Pixsys |
|---|---|
| Assembly | Can be plugged into the back of the desk, up to 2 cards |
| Communication | RS485 Modbus RTU or CANopen |
| Dimensions | 87 x 93 x 35 mm |
| Case | Chrome-plated steel 10/10, RAL 7016 |
| Weight | Approx. 200 g |
| Protection index | IP20 enclosure and connectors |
| Terms of use | 0 to 45 °C, 35 to 95 % RH |
| Certifications | CE, UL |
Touchscreen pedestals 4.3″ to 15″ with software automation
IEC 61131-3 programming, Ethernet, RS485, CAN
Converters and signal isolators, indicators, totalizers
Protections against overvoltages, power supplies, probes
Portable programmer with multipole connector
For ceramic, glass and laboratory ovens: 15 programs, 18 segments
PID controller that can be plugged into a static relay
For multi-zone systems controlled using RS485 Modbus
PID controller for DIN rail, 4 modules
Universal input, isolated analog output, RS485 Modbus
PID controller 48×48 mm (1/16 DIN)
1 or 2 analog inputs, NFC programming, RS485 option