Programmable temperature converter for PT100 and PT1000
Output 4…20 mA, stainless steel casing 316L IP67, M12 connectors
Italcoppie’s EvominiX CM takes over the functions of the EvominiX C in a stainless steel AISI 316L metal casing. It is suitable for demanding environments where a plastic casing is not enough: frequent washing, shocks or hygiene constraints.
The metal body IP65/IP67 is resistant to cleaning, common chemicals, and mechanical stress. It weighs only 22 g.
The M12 connectors at both ends allow it to be screwed onto a TRM or TRC probe and connected with a standard M12 cable.
The measurement range, signal sense and behavior in the event of a sensor failure are configured on a PC with the EVOMINI SET kit. The detection of a break and short circuit follows the NAMUR NE43 recommendation.
DYNATIME SA distributes the Italcoppie sensors in Switzerland and helps you define the execution that is suitable for your application. Discover also our other products temperature transmitters. Associate it with one of our temperature controllers for a complete measurement chain, or contact us for a quote.
| Series | EVOXCM |
|---|---|
| Entrance | PT100 or PT1000 (α 0.00385), 2, 3 or 4 wires |
| Measurement limits | -200 to 850 °C, min. scale 20 °C |
| Precision | ±0.1 °C or ±0.1% of the scale |
| Outtake | 4…20 mA or 20…4 mA, sensor failure according to NAMUR NE43 |
| Response time | < 300 ms |
| Nutrition | 5 to 32 VDC, protected against polarity inversion |
| Configuration | PC running Windows, EVOMINI KIT SET |
| Ambient temperature | -40 to 85 °C |
| Protection index | IP65 / IP67 |
| Case | Stainless steel AISI 316L, approx. 22 g |
| Connections | M12 female (probe) and M12 male (output) |
NTC probe for boiler, G1/4 stainless steel connection 316L
Hexagonal toroid joint, AMP MODU II connector, up to 150 °C
NTC boiler probe with M12x1 mobile nut and o-ring
UL-certified FEP cable, Lumberg connector, up to 150 °C
PT100 threaded probe 1/8″ with integrated 4…20 mA transmitter
IP67 enclosure, M12 output, up to 110 °C
Programmable temperature converter for PT100 and PT1000
Output 4…20 mA, molded IP67 enclosure, M12 connectors
Thermomultiplier K or J with mineral insulation
M8 connector with overmolded IP67 cover, minimal footprint
Resistance probe PT100 or PT1000 in a metal tube
2-wire silicone cable, from -50 to 180 °C