Programmable temperature converter for PT100 and PT1000
Output 4…20 mA, molded IP67 enclosure, M12 connectors
The EvominiX C from Italcoppie is a programmable signal converter for PT100 and PT1000 probes, housed in an IP67 overmolded enclosure with M12 connectors at both ends. It is mounted directly on the probe and converts the measurement into a 4…20 mA signal, without a connection head or module in the cabinet.
On the input side, the EvominiX C is connected to a M12 connector probe, like the TRM and TRC series from Italcoppie. On the output side, a standard M12 cable carries the 4…20 mA signal to the automation system or controller.
The accuracy reaches ±0.1 °C or ±0.1% of the scale, with possible compensation of the sensor error in 2 points.
The measurement range, signal sense and behavior in the event of a sensor failure are configured on a PC with the EVOMINI SET kit. The detection of a break and short circuit follows the NAMUR NE43 recommendation.
DYNATIME SA distributes the Italcoppie sensors in Switzerland and helps you define the execution that is suitable for your application. Discover also our other products temperature transmitters. Associate it with one of our temperature controllers for a complete measurement chain, or contact us for a quote.
| Series | EVOXC |
|---|---|
| Entrance | PT100 or PT1000 (α 0.00385), 2, 3 or 4 wires |
| Measurement limits | -200 to 850 °C, min. scale 20 °C |
| Precision | ±0.1 °C or ±0.1% of the scale |
| Outtake | 4…20 mA or 20…4 mA, sensor failure according to NAMUR NE43 |
| Response time | < 300 ms |
| Nutrition | 5 to 32 VDC, protected against polarity inversion |
| Configuration | PC running Windows, EVOMINI KIT SET |
| Ambient temperature | -40 to 85 °C |
| Protection index | IP65 / IP67 |
| Case | Overwhelmed |
| Connections | M12 female (probe) and M12 male (output) |
PT1000 probe class A for boiler, M10x1.25 connection
EPP/silicone cable, Mate-N-Lock connector, up to 150 °C
PT100 probe and integrated 4…20 mA transmitter, all in stainless steel
Ø 6 mm shank reduced to 4.4 mm, weldable connections, up to 300 °C
Thermomultiplier K or J with mineral insulation
Standard compensated connector, up to 1150 °C
PT1000 compact A-grade probe, G1/8 stainless steel connection 316L
Built-in cable, Molex Micro-Fit connector, -50 to 150 °C
Compact NTC probe with G1/4 threaded connection in 316L stainless steel
Built-in cable, AMP MODU II connector, up to 150 °C
Overmolded waterproof temperature probe, flat TPE cable
PT100, PT1000 or NTC, from -40 to 150 °C