Programmable PDA controller 15 cycles / 18 steps
PDA programmer with multi-pole connector, single control loop. Allows the programming of 15 cycles/programs that can provide up to 18 steps/segments, all of which can be configured by the user as raise/maintain/lower. Programming mode and display of the work cycle that is intuitive and simple to use even for inexpert operators. Specifically designed for the automation of hobby and professional kilns for ceramics, glass or laboratory applications that require the programming of cycles/curves with temperature in relation to time.
Box | 120 x 65 (front panel) x 65 mm |
Power supply | 24...230Vac/Vdc ±15% 50/60 Hz |
Consumption | 4W |
Display | Display 4 digit 0,56" red + 4 digit 0,4" green + Bargraph |
Operating conditions | Temperature 0-45 °C, humidity 35...95% RH (non condensing) |
Material | Box: ABS; Front panel: polycarbonate |
Weight | Approx. 550 gr |
Sealing | IP65 (Front panel), IP20 (Box and Terminal blocks) |
Accessories | Connector 7poles/female (kiln side), Bracket for panel mounting |
Besoin d’un renseignement ? Nous vous répondons dans les meilleurs délais.
DYNATIME SA
Av. des Champs-Montants 16c
CH – 2074 Marin
Tél: +41 (0) 32 968 15 36
> Nous contacter par e-mail